Cal Slot Control

Cal Slot Control

Cal Slot Control Cal Slot Control is a very powerful tuning tool which allows for multiple configurations to be applied to each cal slot. To enable the “Cal Slot Control” function the menu item must be checked to “ON” in the functions setup as pictured below: Config...
Boost Control

Boost Control

Boost Control Production based vehicles often produce more power than what we used to run in dedicated drag race vehicles. Due to advances in engine design and turbocharger technology, high horsepower levels are easily attained. Not so easy is how to tame this new...
Table Control

Table Control

Table Control This week we will look at “Emtron Table Control”. What does it do? Throughout the Emtune software you will notice that many functions have Table Control capability. This allows the user to control how the Main Tables within functions may be applied. The...

Closed Loop Lambda

Closed Loop Lambda As the KV series ECU’s have two (2) Bosch LSU lambda controllers on board it is now very straight forward to have a wide band lambda system fitted simply by wiring a Bosch 4.9 LSU sensor directly to the ECU A Connector. The Lambda Control system has...

Calculations

Calculations A “Calculations” menu item has been added to the “Vehicle Functions” tab in the Tuning View. Firmware Version V1_1_115 or greater is required for these functions to work. There are two (2) functions within this tab: 1) Fuel Used Calculation This function...

Onboard Accelerometer Introduction

Onboard Accelerometer Introduction Engine Management Systems in the aftermarket world are expected to handle many tasks other than simply controlling an engine. We put a lot of thought into what other features people may need in the future when engineering the KV...